setions and intersects in maya

Introduction to Maya - Modeling Fundamentals Vol 1

This course will look at the fundamentals of modeling in Maya with an emphasis on creating good topology. We'll look at what makes a good model in Maya and why objects are modeled in the way they are.

Watch

# 1 05-04-2008 , 11:06 AM

Registered User
Join Date: Mar 2008

Posts: 9

Hello,

just making my first architecture model in maya. I need to export sections to autocad.

Before I used sketchup. and use section planes and then export dwg.

1) does maya have something like section planes? or do I intersect everything with a nurbs plane or polygon plane that i create and then delete everything on one side of the plane?

2) If I have to work with a plane, there's my second problem: how do I intersect curves that are orthogonal on a plane with that plane?
thanks a bunch!

ken

Quote

# 2 05-04-2008 , 11:25 AM

Registered User
Join Date: Jan 2005

Location: vienna

Posts: 1,095

you have a various set of operations with both methods - poly and nurbs. thing is, to break it down simply - you have to have some experience and understandig to work with them in maya. I may be mistaken but it sounds you dont have much experience with maya.

anyway. what i can tell fast is (coz i work a lot with architecture and maya) you can make boolean operations. stick together 2 shapes and make 3 possible new forms -> minus A from B, A+B, and intersection volume. you can project curves onto surfaces and create from those projections new curves on surface and so on...

ad1) yes and yes. maya got mirror cut tool which works like this. you could also do it the other way.

ad2) create curve from plane edge (90°) and goto orthogonal view then do a "cut curve" operation. there are many ways to do something but it did cost me quite some time to get pieces together.

good luck!

everything starts and ends in the right place at the right time.

Quote

Reply to this thread