I have a question about scaling a object. I have one simple bear where i have made 2 seperate eyebrows on. I combined it to the bear, and it seems like everything works fine until i scale it down. then it slowly works it way out from the bear. the more i scale it down, the gap between the head and the eyebrow gets bigger and bigger.

I wil try to get some photos out her. If you see them, you will understand the problem.

Thank you

Attached Thumbnails

it does seem as though you haven't combined it, try without combining it and group it instead, center pivot and then try and scale it, see what happens

Cheers Myth

---

Custom built W10 Pro 64 bit, Hazwell Intel 5820, Asus X99 MOBO, 32 GB DDR4 Ram, EVGA nVidia GTX1080 Founders Edition, 512GB SSD Primary HDD, 16TB Storage, 27" Samsung 4k Display. Wacom 27QHD, Oculus Rift CV1

You likely have double transforms on the object as a result of duplicating the eyebrow. Try deleting history on the objects. Best to group them instead of combining them too. But delete history either way.

---

-stwert

Website - Blog - YouTube - Vimeo - Facebook - Twitter

-->How to Effectively Ask Questions on Forums<--

i have combined it, separate it again and freeze transformations and delete all history, combined it again. still same problem. I have tried to group it instead, but still it won`t work with me. nothing works!

delete the problematic eyebrow and duplicate the good one, put a -1 in the scale (normally -X) and regroup the lot, also check the outliner making sure there is no history lingering about as sometimes it does.

Cheers Myth

---

Custom built W10 Pro 64 bit, Hazwell Intel 5820, Asus X99 MOBO, 32 GB DDR4 Ram, EVGA nVidia GTX1080 Founders Edition, 512GB SSD Primary HDD, 16TB Storage, 27" Samsung 4k Display. Wacom 27QHD, Oculus Rift CV1

hi again. After going back and delete eyebrow and delete all history on everything else. i duplicated special and did everything all over again. every blind shapes and so on.. that seem to work so far. but i did all that once before and then it did not work. But, maby i forgot something last time. i sure hope so!
Thank you guys for helping!