Maya for 3D Printing - Rapid Prototyping
In this course we're going to look at something a little different, creating technically accurate 3D printed parts.
# 1 31-03-2005 , 01:41 PM
Registered User
Join Date: Mar 2005
Location: Barcelona
Posts: 7

Image plane problems!!!

Hello, I'm a beginner maya, and I try to create my first 3d model. But, my first problem is very basic user added image , because I can't put the image plane in the same scale.

I try to create aircraft model. I use 3 image plane, in the same scale. But when I import this images in maya, the side image was in a big scale.

my question is; how I put same scale in the 3 images (in maya)?

Thanks and good luck !!

Attached Images

__('`··_ Lluc _··´')__
# 2 31-03-2005 , 01:52 PM
lisa_gonzalez's Avatar
Subscriber
Join Date: Jun 2004
Location: London, England
Posts: 301
You need to take your picture into some image editing software, like Photoshop, and you can crop the individual images in there that are all the right size in relation to each other (so you'll have seperate side, front, top views, etc). Sorry, I can't go into much detail right now, I'm v. busy, but I'll post again with some more info soon as I get the chance.............


When in doubt......smile!

https://www.x-menthelaststand.com/
# 3 31-03-2005 , 02:01 PM
Registered User
Join Date: Mar 2005
Location: Barcelona
Posts: 7
Thanks liza, I use 3 image plane: top view, front view and side view (in the same scale).

I upload this image for the web,because is more easy. user added image


__('`··_ Lluc _··´')__
# 4 01-04-2005 , 05:24 AM
bubbleme80's Avatar
Registered User
Join Date: Mar 2005
Posts: 126
im not sure if u r actually using image plane feature or the way the tutorial here teachs u.

since they all same size, u can try using image place feature in maya instead of using polygon plane as told in tutorial.

(the top/side/front pictures of the airplane must be matching size, and canvas height must be same too)

1) open up maya. make it show top/front/side view. Don't move the camera at all.

2) then, from the top view, select View>Image Plane>Import Image.

3) browse and select the top view picture of the airplane

4) go View>Image Plane>Image plane attributes. Change center y to like.. 20

5) do same w/ side and front. Side (center x to -20) Front (center z to -20)

center thingies moves the image plane. i hope u get it workin. im new to maya too

# 5 01-04-2005 , 05:50 AM
Pony's Avatar
Subscriber
Join Date: Mar 2003
Location: with PonysGirl
Posts: 2,573
lisa is pointing to the right anser I think. The eazyest way to do it is to make sure the 3 images are the same size in pixels.. in photoshop crop each one out in to a seprat image for that view plain. check the size of each one.. and what ever is the largest number in X or Y you use canvase size to add more res to the smaller croped images. that way there all the same size both in the picture and in res space, when you put them in maya you will not have a scale problem that way.. just try to get the image plains right in there location.

# 6 01-04-2005 , 05:51 AM
Pony's Avatar
Subscriber
Join Date: Mar 2003
Location: with PonysGirl
Posts: 2,573
and if needed I could do a little demo on this blueprint its self.

# 7 01-04-2005 , 08:27 AM
lisa_gonzalez's Avatar
Subscriber
Join Date: Jun 2004
Location: London, England
Posts: 301
I can remember where there is a very good tutorial on preparing orthographic image planes in photoshop, and then importing them into Maya. It can be found at www.3d-palace.com (sorry for plugging another site user added image ) - you will have to login to this site though if you wish to download the tut. It can be found under the free Maya tutorial section, and it is in the first part of the Jaguar tutorial. There is also, of course, an image plane tutorial on this site:

https://www.simplymaya.com/movie_page...html?tut_id=24

....I'm not too sure if this tut will teach you how to prepare the seperate images in Photoshop though. Worth a look anyhow.

Hope this helps,

LisaG user added image


When in doubt......smile!

https://www.x-menthelaststand.com/
# 8 01-04-2005 , 11:50 AM
Registered User
Join Date: Mar 2005
Location: Barcelona
Posts: 7
Thanks Guys!! :p

I will give it a go, and I will never give up for learn a lot. Now I start to modeling

GOOD LUCK FOR ALL !!!!!!!!! user added image

Attached Thumbnails

__('`··_ Lluc _··´')__
Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads