Introduction to Maya - Modeling Fundamentals Vol 1
This course will look at the fundamentals of modeling in Maya with an emphasis on creating good topology. We'll look at what makes a good model in Maya and why objects are modeled in the way they are.
# 1 10-04-2013 , 09:47 PM
Events Team at Wargaming.net
Join Date: Dec 2008
Location: Crystal Lake, Illinois
Posts: 486

Maya File error

I have a Maya File that keeps launching and crashing with a critical error. Anyone know a way to check the file for the damage? or a way to maybe open it just long enough to safe a new version of it?

It's an ASCII file

# 2 10-04-2013 , 09:57 PM
NextDesign's Avatar
Technical Director
Join Date: Feb 2004
Posts: 2,988
Does it give an error message?


Imagination is more important than knowledge.
# 3 10-04-2013 , 10:44 PM
Events Team at Wargaming.net
Join Date: Dec 2008
Location: Crystal Lake, Illinois
Posts: 486
Just says: Fatal Error. Attempting to save in xxxxxx

Not sure if this will help, found the dump log


//================================================== ===
Maya Crash Report
//================================================== ===

Exception code: C0000005: ACCESS_VIOLATION - illegal read at address 0x346AB64C
Fault address: 07D254F2 in C:\Program Files\Autodesk\Maya2011\bin\DeformSlice.dll
0001:001344F2 Logical offset (see .map file for location)

Call stack:
(0) section:offset Address Frame
0001:001344F2 0x07D254F2 0x0102D0F0
Module: C:\Program Files\Autodesk\Maya2011\bin\DeformSlice.dll (-exported-)
Location: TgenericSurfaceAssociator::uvAssociation + 0x12 bytes
Decl: public: enum TsurfaceAssociation::TsurfaceType TgenericSurfaceAssociator::uvAssociation(class T2Float const & ptr64,class TsurfaceAssociation & ptr64)
(1) section:offset Address Frame
0001:00134DD5 0x07D25DD5 0x0102D190
Module: C:\Program Files\Autodesk\Maya2011\bin\DeformSlice.dll (-exported-)
Location: TpolySurfaceAssociator::associateVtx + 0x115 bytes
Decl: public: enum TsurfaceAssociation::TsurfaceType TpolySurfaceAssociator::associateVtx(unsigned int,class T4dFltVector const & ptr64,class TsurfaceAssociation & ptr64)
(2) section:offset Address Frame
0001:0000CAAD 0x1540DAAD 0x0102D300
Module: C:\Program Files\Autodesk\Maya2011\bin\Modifiers.dll (-exported-)
Location: TtransferAttributesCmd::deformerType + 0x5EAD bytes
Decl: protected: virtual class Tmetaclass * ptr64 TtransferAttributesCmd::deformerType(void)
(3) section:offset Address Frame
0001:000049BD 0x154059BD 0x0102D3A0
Module: C:\Program Files\Autodesk\Maya2011\bin\Modifiers.dll (-exported-)
Location: TtransferAttributesFty::action + 0xCD bytes
Decl: public: virtual int TtransferAttributesFty::action(void)
(4) section:offset Address Frame
0001:00004537 0x15405537 0x0102DA00
Module: C:\Program Files\Autodesk\Maya2011\bin\Modifiers.dll (-exported-)
Location: TdnTransferAttributes::deformData + 0x1B97 bytes
Decl: protected: virtual void TdnTransferAttributes::deformData(class TdataBlock & ptr64,unsigned int,class T4dDblMatrix const & ptr64,class Tdata & ptr64,unsigned int)
(5) section:offset Address Frame
0001:000BEA67 0x0254FA67 0x0102DB70
Module: C:\Program Files\Autodesk\Maya2011\bin\DataModel.dll (-exported-)
Location: TdnGeometryFilter::computePlug + 0x367 bytes
Decl: protected: virtual void TdnGeometryFilter::computePlug(class Tplug const & ptr64,class TdataBlock & ptr64)
(6) section:offset Address Frame
0001:000024CB 0x154034CB 0x0102DBF0
Module: C:\Program Files\Autodesk\Maya2011\bin\Modifiers.dll (-exported-)
Location: TdnTransferAttributes::computePlug + 0xAB bytes
Decl: protected: virtual void TdnTransferAttributes::computePlug(class Tplug const & ptr64,class TdataBlock & ptr64)
(7) section:offset Address Frame
0001:000B6824 0x01EE7824 0x0102DCF0
Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-)
Location: TdependNode::dbEvaluate + 0x1E4 bytes
Decl: protected: virtual bool TdependNode::dbEvaluate(class TmsgEval & ptr64)
(8) section:offset Address Frame
0001:000B8C37 0x01EE9C37 0x0102DD50
Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-)
Location: TdependNode::mpSafeDbEvaluate + 0x37 bytes
Decl: protected: bool TdependNode::mpSafeDbEvaluate(class TmsgEval & ptr64)
(9) section:offset Address Frame
0001:000B8E23 0x01EE9E23 0x0102DDF0
Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-)
Location: TdependNode::processEval + 0x1B3 bytes
Decl: protected: virtual bool TdependNode::processEval(class TmsgEval & ptr64)
(10) section:offset Address Frame
0001:00057B2F 0x01E88B2F 0x0102DE20
Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-)
Location: TfastTrack::debug + 0x86F bytes
Decl: public: virtual void TfastTrack::debug(class TdebugOutput & ptr64,unsigned int)
(11) section:offset Address Frame
0001:00016BB1 0x01E47BB1 0x0102DED0
Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-)
Location: Tplug::evalConnectionValue + 0xF1 bytes
Decl: public: bool Tplug::evalConnectionValue(bool,class TdgContext const & ptr64,class TdataHandle & ptr64)
(12) section:offset Address Frame
0001:0001A266 0x01E4B266 0x0102DFB0
Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-)
Location: Tplug::evaluateValue + 0xC6 bytes
Decl: public: bool Tplug::evaluateValue(class TdataHandle & ptr64,class TdataBlock const & ptr64,bool)
(13) section:offset Address Frame
0001:0004E8DB 0x01E7F8DB 0x0102E090
Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-)
Location: TdataBlockDG::value + 0x10B bytes
Decl: public: virtual class TdataHandle TdataBlockDG::value(class Tattribute const & ptr64)
(14) section:offset Address Frame
0001:00070514 0x04221514 0x0102E320
Module: C:\Program Files\Autodesk\Maya2011\bin\Poly.dll (-exported-)
Location: TmeshShape::computeObject + 0x224 bytes
Decl: protected: void TmeshShape::computeObject(class Tplug const & ptr64,class TdataBlock & ptr64)
(15) section:offset Address Frame
0001:000B6824 0x01EE7824 0x0102E420
Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-)
Location: TdependNode::dbEvaluate + 0x1E4 bytes
Decl: protected: virtual bool TdependNode::dbEvaluate(class TmsgEval & ptr64)
(16) section:offset Address Frame
0001:0010CADB 0x0259DADB 0x0102E450
Module: C:\Program Files\Autodesk\Maya2011\bin\DataModel.dll (-exported-)
Location: TdagObject::dbEvaluate + 0x1B bytes
Decl: public: virtual bool TdagObject::dbEvaluate(class TmsgEval & ptr64)
(17) section:offset Address Frame
0001:000B8BA2 0x01EE9BA2 0x0102E4B0
Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-)
Location: TdependNode::mpSafeDbEvaluateWithSet + 0x52 bytes
Decl: protected: bool TdependNode::mpSafeDbEvaluateWithSet(class TmsgEval & ptr64)
(18) section:offset Address Frame
0001:00005A4D 0x01E36A4D 0x0102E540
Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-)
Location: Tplug::processEval + 0x9D bytes
Decl: private: bool Tplug::processEval(class TdgContext const & ptr64,class TdataHandle * ptr64)
(19) section:offset Address Frame
0001:0001A536 0x01E4B536 0x0102E620
Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-)
Location: Tplug::evaluateValue + 0x396 bytes
Decl: public: bool Tplug::evaluateValue(class TdataHandle & ptr64,class TdataBlock const & ptr64,bool)
(20) section:offset Address Frame
0001:0004E8DB 0x01E7F8DB 0x0102E700
Module: C:\Program Files\Autodesk\Maya2011\bin\DependEngine.dll (-exported-)
Location: TdataBlockDG::value + 0x10B bytes
Decl: public: virtual class TdataHandle TdataBlockDG::value(class Tattribute const & ptr64)
(21) section:offset Address Frame
0001:00071FF0 0x04222FF0 0x0102E750
Module: C:\Program Files\Autodesk\Maya2011\bin\Poly.dll (-exported-)
Location: TmeshShape::meshDataRef + 0x30 bytes
Decl: public: class Tdata & ptr64 TmeshShape::meshDataRef(class TdgContext & ptr64)
(22) section:offset Address Frame
0001:00075E45 0x04226E45 0x0102E780
Module: C:\Program Files\Autodesk\Maya2011\bin\Poly.dll (-exported-)
Location: TmeshShape::midBody + 0x15 bytes
Decl: public: class TmidBody * ptr64 TmeshShape::midBody(void)
(23) section:offset Address Frame
0001:000217BE 0x041D27BE 0x0102E7C0
Module: C:\Program Files\Autodesk\Maya2011\bin\Poly.dll (-exported-)
Location: TmeshShape::clearActiveComponents + 0xE bytes
Decl: public: void TmeshShape::clearActiveComponents(void)
(24) section:offset Address Frame
0001:000BC0E9 0x0598D0E9 0x0102E8A0
Module: C:\Program Files\Autodesk\Maya2011\bin\PolySlice.dll (-exported-)
Location: TpolyHelixCmd::`default constructor closure' + 0xE29 bytes
Decl: public: void TpolyHelixCmd::`default constructor closure'(void)
(25) section:offset Address Frame
0001:002BBEA8 0x03C6CEA8 0x0102E970
Module: C:\Program Files\Autodesk\Maya2011\bin\Shared.dll (-exported-)
Location: TglobalTranslator::callNodeCallbacks + 0x1C8 bytes
Decl: public: static void TglobalTranslator::callNodeCallbacks(class TDNarray & ptr64,enum TglobalTranslator::TaddCallbackMode)
(26) section:offset Address Frame
0001:002BC33A 0x03C6D33A 0x0102E9A0
Module: C:\Program Files\Autodesk\Maya2011\bin\Shared.dll (-exported-)
Location: TglobalTranslator::callNodeCallbacks + 0x3A bytes
Decl: public: static void TglobalTranslator::callNodeCallbacks(class TsceneFile & ptr64,enum TglobalTranslator::TaddCallbackMode)
(27) section:offset Address Frame
0001:002BCA76 0x03C6DA76 0x0102E9D0
Module: C:\Program Files\Autodesk\Maya2011\bin\Shared.dll (-exported-)
Location: TglobalTranslator::callNodeCallbacks + 0x56 bytes
Decl: public: static void TglobalTranslator::callNodeCallbacks(enum TglobalTranslator::TaddCallbackMode)
(28) section:offset Address Frame
0001:002BD498 0x03C6E498 0x0102ED00
Module: C:\Program Files\Autodesk\Maya2011\bin\Shared.dll (-exported-)
Location: TglobalTranslator::doReadFile + 0x9E8 bytes
Decl: private: static bool TglobalTranslator::doReadFile(class TsceneFile & ptr64,bool,bool)
(29) section:offset Address Frame
0001:002A0FAE 0x03C51FAE 0x0102ED30
Module: C:\Program Files\Autodesk\Maya2011\bin\Shared.dll (-exported-)
Location: TfileUtil::readFile + 0x5E bytes
Decl: public: static bool TfileUtil::readFile(class TsceneFile * ptr64,bool,bool,bool)
(30) section:offset Address Frame
0001:002913A5 0x03C423A5 0x0102EF60
Module: C:\Program Files\Autodesk\Maya2011\bin\Shared.dll (-exported-)
Location: TsceneOperator::openFile + 0x385 bytes
Decl: public: static bool TsceneOperator::openFile(class TsceneFile * ptr64,bool,bool)
(31) section:offset Address Frame
0001:002890CC 0x03C3A0CC 0x0102EFF0
Module: C:\Program Files\Autodesk\Maya2011\bin\Shared.dll (-exported-)
Location: TfileCmd::handleFileOpenFlag + 0x44C bytes
Decl: private: bool TfileCmd::handleFileOpenFlag(class TargDatabase & ptr64,class TsceneFile * ptr64)
(32) section:offset Address Frame
0001:0028EF9B 0x03C3FF9B 0x0102F430
Module: C:\Program Files\Autodesk\Maya2011\bin\Shared.dll (-exported-)
Location: TfileCmd::handleFlags + 0x138B bytes
Decl: protected: bool TfileCmd::handleFlags(class TargDatabase & ptr64,class Tstring const & ptr64)
(33) section:offset Address Frame
0001:0028FE6E 0x03C40E6E 0x0102F590
Module: C:\Program Files\Autodesk\Maya2011\bin\Shared.dll (-exported-)
Location: TfileCmd::doCommand + 0x35E bytes
Decl: public: virtual bool TfileCmd::doCommand(class TargList & ptr64)
(34) section:offset Address Frame
0001:0001354B 0x01D5454B 0x0102F660
Module: C:\Program Files\Autodesk\Maya2011\bin\CommandEngine.dll (-exported-)
Location: TmetaCommand::newSyntax + 0x6BB bytes
Decl: private: virtual class Tsyntax * ptr64 TmetaCommand::newSyntax(void)
(35) section:offset Address Frame
0001:000296E0 0x01D6A6E0 0x0102F6B0
Module: C:\Program Files\Autodesk\Maya2011\bin\CommandEngine.dll (-exported-)
Location: TmelVariableList::`default constructor closure' + 0xB0 bytes
Decl: public: void TmelVariableList::`default constructor closure'(void)
(36) section:offset Address Frame
0001:00035A84 0x01D76A84 0x0102F700
Module: C:\Program Files\Autodesk\Maya2011\bin\CommandEngine.dll (-exported-)
Location: TmelVariableList::`default constructor closure' + 0xC454 bytes
Decl: public: void TmelVariableList::`default constructor closure'(void)
(37) section:offset Address Frame
0001:000520E0 0x01D930E0 0x0102F730
Module: C:\Program Files\Autodesk\Maya2011\bin\CommandEngine.dll (-exported-)
Location: SophiaExecutable::evaluate + 0x60 bytes
Decl: public: union Value * ptr64 SophiaExecutable::evaluate(void * ptr64)
(38) section:offset Address Frame
0001:0001A8B3 0x01D5B8B3 0x0102F890
Module: C:\Program Files\Autodesk\Maya2011\bin\CommandEngine.dll (-exported-)
Location: TcommandEngine::executeCommand + 0x393 bytes
Decl: public: int TcommandEngine::executeCommand(class Tstring const & ptr64,bool,bool,class TmelCmdResult * ptr64,unsigned int)
(39) section:offset Address Frame
0001:0000702B 0x4000802B 0x0102F980
Module: C:\Program Files\Autodesk\Maya2011\bin\maya.exe (-nosymbols-)
(40) section:offset Address Frame
0001:00008931 0x40009931 0x0102FAF0
Module: C:\Program Files\Autodesk\Maya2011\bin\maya.exe (-nosymbols-)
(41) section:offset Address Frame
0001:0000A6DE 0x0203B6DE 0x0102FBF0
Module: C:\Program Files\Autodesk\Maya2011\bin\ExtensionLayer.dll (-exported-)
Location: Tapplication::start + 0x6E bytes
Decl: public: void Tapplication::start(void)
(42) section:offset Address Frame
0001:00003B9E 0x40004B9E 0x0102FE30
Module: C:\Program Files\Autodesk\Maya2011\bin\maya.exe (-nosymbols-)
(43) section:offset Address Frame
0001:00012F37 0x40013F37 0x0102FEA0
Module: C:\Program Files\Autodesk\Maya2011\bin\maya.exe (-nosymbols-)
(44) section:offset Address Frame
0001:00012463 0x40013463 0x0102FF50
Module: C:\Program Files\Autodesk\Maya2011\bin\maya.exe (-nosymbols-)
(45) section:offset Address Frame
0001:0001552D 0x76BF652D 0x0102FF80
Module: C:\Windows\system32\kernel32.dll (-exported-)
Location: BaseThreadInitThunk + 0xD bytes
Decl: BaseThreadInitThunk
(46) section:offset Address Frame
0001:0002B521 0x76E2C521 0x0102FFD0
Module: C:\Windows\SYSTEM32\ntdll.dll (-exported-)
Location: RtlUserThreadStart + 0x21 bytes
Decl: RtlUserThreadStart
End of stack

//crash file = C:\Users\Grant\AppData\Local\Temp\MayaCrashLog1304 10.1909.log
//version = 2010.03.19.0311
//cut = Fri 03/19/2010, 201003190311
//last tool: renderWindowSelectContextItem
//================================================== ==
//panel with focus: modelPanel4
//visible panels:
// modelPanel4 outlinerPanel1 hyperShadePanel1 polyTexturePlacementPanel1
//================================================== ==
//Memory usage:
// 2048.000 Mb Free Memory
// 2048.000 Mb Free Swap
// 422.602 Mb Current
// 3.883 Mb POLY_DRAW_CACHE_DATA
// 0.135 Mb arguments
// 48.125 Mb MEL
// 3.610 Mb Data Blocks
// 0.125 Mb Keys
// 1.697 Mb Arrays
// 3.500 Mb Render Cache
// 0.123 Mb Pixel Map
// 0.373 Mb Transforms
// 0.174 Mb Object Arrays
//================================================== ==


Last edited by Ozgalis; 11-04-2013 at 12:16 AM.
# 4 11-04-2013 , 12:33 AM
Events Team at Wargaming.net
Join Date: Dec 2008
Location: Crystal Lake, Illinois
Posts: 486
Alright I am pretty much caught up with where this file was at anyway so dont worry to much about it. How ever if anyone comes up with a solution or knows a good place to learn this type of stuff to fix later problems please keep me informed.

# 5 11-04-2013 , 02:22 AM
NextDesign's Avatar
Technical Director
Join Date: Feb 2004
Posts: 2,988
It might be a corrupted DLL, DeformSlice.dll. You might want to try reinstalling, as this may happen again.


Imagination is more important than knowledge.
# 6 11-04-2013 , 02:39 AM
Events Team at Wargaming.net
Join Date: Dec 2008
Location: Crystal Lake, Illinois
Posts: 486
I recreated the problem, its using Transfer Attributes with UV selected instead of World, Local, or Component . Happens everytime I try and use that selection.

Posting Rules Forum Rules
You may not post new threads | You may not post replies | You may not post attachments | You may not edit your posts | BB code is On | Smilies are On | [IMG] code is On | HTML code is Off

Similar Threads