Maya 2020 fundamentals - modelling the real world
Get halfway through a model and find it's an unworkable mess? Can't add edge loops where you need them? Can't subdivide a mesh properly? If any of this sounds familiar check this course out.
#
1
12-12-2004
, 07:52 PM
Subscriber
Join Date: Aug 2004
Join Date: Aug 2004
Posts: 515
girlie head attempt
let me know what i can improve on or what im doing wrong.
this is poly'd and converted to subd
btw, is there any way to convert from sub-d back to poly without having subdivided faces? i tried all the settings in the convert option box and i keep getting more faces than when i converted to sub d
in lightwave you could just hit the tab key to go from poly to sub d and then subd back to poly. much easier that way
Last edited by Turbo Dan; 12-12-2004 at 07:55 PM.
#
2
12-12-2004
, 07:57 PM
Subscriber
Join Date: Aug 2004
Join Date: Aug 2004
Posts: 515
the way im modeling it is im getting a rough outline to start out with and once the head is done im gonna go back and detail everything and make all the lines correct... should i point massage as i model or is it ok to do it at the end?
#
4
12-12-2004
, 08:43 PM
Registered User
Join Date: Jan 2004
Join Date: Jan 2004
Location: Novi Sad, Detelinara, Serbia
Posts: 468
Best resolt would come, if every one in the group are doing what is best for himself and the group!!
Sorry for bad English, See ya
dead mosquito-blog-on english too
#
5
12-12-2004
, 09:06 PM
Subscriber
Join Date: Aug 2004
Join Date: Aug 2004
Posts: 515
i checked the verticy option like you said and it worked! that must have been the only option i didn't fiddle with. thanxOriginally posted by Ankalagon
You should make model clean and nice from begining til the end cos if you wait for too long you wil end up in mes!!! Jes play around with convert sub-d to poly option, check the vartex option i think and you should get what you want!! Nice model so far BTW!!!
now that ive got a rought shape of the head im gonna go back and detail everything nicely, next time i will detail as i go.
#
6
12-12-2004
, 09:19 PM
Subscriber
Join Date: May 2004
Join Date: May 2004
Location: That place with all those people
Posts: 1,041
Watch Space Wars at www.3dden.co.uk now!
__________________________
My pin number is XXXX
#
7
12-12-2004
, 11:12 PM
Lead Modeler - Framestore
Join Date: Feb 2003
Join Date: Feb 2003
Location: UK
Posts: 6,287
Yeah heads are always a bit tricky when you first start doing them, but eventually you'll find a method that works best for you.
I usually just start with a poly cube and just get the general shape around the eyes, nose and mouth areas first, I dont actually do the ear hole until I'm happy with the main parts first. Also at this stage I would have far less polys too. Thats the beauty of subds, it allows for less, but smoother geometry similar to smooth proxy in poly menu, while you work the mesh to the shape you want, then, cut the detail in later. I attached an image for Rubber Chicken earlier last week so you can have it too. Its of an old man but the mesh is good over the pic. Study it and observe the edge flow around the nose and mouth areas, this is an absolute rule of head modelling also known as 'edge loops'. You are basically indirectly defining the way muscles under the skin work but are are using the flow over the skin surface. This will actually allow for easier use when animating the facial expression. Hope this helps
_J
#
8
12-12-2004
, 11:15 PM
Lead Modeler - Framestore
Join Date: Feb 2003
Join Date: Feb 2003
Location: UK
Posts: 6,287
Cheers
_J
#
9
13-12-2004
, 12:51 AM
Subscriber
Join Date: Aug 2004
Join Date: Aug 2004
Posts: 515
the reference images im using at a bit tough to work with as they are not quite perfect profile images, she has her head pointed slightly down in the front one and slightly to the side in the side profile.
#
10
13-12-2004
, 12:52 AM
Subscriber
Join Date: Aug 2004
Join Date: Aug 2004
Posts: 515
ill have to ask her if she minds if i pass around pictures of her, hahah
Last edited by Turbo Dan; 13-12-2004 at 12:57 AM.
#
11
14-12-2004
, 10:33 PM
Registered User
Join Date: Jun 2003
Join Date: Jun 2003
Location: Johannesburg
Posts: 641
I don't know if this might help you out, but I have gone through so many methods and ways of modeling a head, and I finally came across a great tutorial (IMO) that creates a head in a very cool way, and it is the method that I have become familiar with in head construction, because of the fact that you define exactly where you want the detail to be.....anyways here is the link, check it out, it might be of use to you....https://www.thehobbitguy.com/tutorial...ing/index.html
MainlineX
-------------------------------------------
#
12
17-12-2004
, 05:15 PM
Registered User
Join Date: Jul 2003
Join Date: Jul 2003
Posts: 57
eat the corn--
#
13
18-12-2004
, 03:55 AM
Registered User
Join Date: Sep 2003
Join Date: Sep 2003
Location: USA
Posts: 658
Posting Rules Forum Rules
Similar Threads
first attempt @ modelling a head.
by shadowspy in forum Work In Progress replies 3 on 25-12-2007
First Head Modelling Attempt - All CC Welcome
by BMS in forum Work In Progress replies 9 on 14-04-2006
First attempt at a head (alien), having face/surface/extrude face problems
by Spoudazo in forum Maya Basics & Newbie Lounge replies 4 on 22-06-2005
first attempt at semi-realistic head model
by discostu in forum Maya Basics & Newbie Lounge replies 2 on 24-05-2004
first head modeling attempt in maya
by philip - liquid.arts in forum Work In Progress replies 21 on 18-03-2003
Topics
New tutorial - Create tileable textures from photos. Photoshop to Alchemist to Maya 2
By David
Site News & Announcements
3
Free Courses
Full Courses
VFX News
How computer animation was used 30 years ago to make a Roger Rabbit short
On 2022-07-18 14:30:13
Sneak peek at Houdini 19.5
On 2022-07-18 14:17:59
VFX Breakdown The Man Who Fell To Earth
On 2022-07-15 13:14:36
Resident Evil - Teaser Trailer
On 2022-05-13 13:52:25
New cloud modeling nodes for Bifrost
On 2022-05-02 20:24:13
MPC Showreel 2022
On 2022-04-13 16:02:13