IK Joint problems...

# 1 25-12-2006 , 07:15 AM

Simply Maya OG
Join Date: Dec 2002

Location: Queensbury NY, US A

Posts: 1,438

I just made a skeleton w/all the joints and whatnot, but Im having problem with the IK joints. I made a IK joint from the heel, to the hip bone. When I move the heel UP, the knee moves out to the side, instead of moving out/fowards, like it naturally does. Whats causing this?

- Hybrid

Quote

# 2 25-12-2006 , 07:32 AM

Subscriber
Join Date: Jun 2003

Location: stuck in the 90's boston, USA

Posts: 1,871

you probably need to set a prefered angle.
but if layed out the joins with a slight bend in the direction it should bend, it shouldnt do that.
unless theres some other problem with the ik solver.

Image dump

Quote

# 3 25-12-2006 , 07:35 AM

Simply Maya OG
Join Date: Dec 2002

Location: Queensbury NY, US A

Posts: 1,438

I layed out the joints straight. Should I go back and add a slight bend in the knee? If not, how do I set a prefered angle? i looked in the attribute editor, but coudnt find ne thing.

- Hybrid

Quote

# 4 25-12-2006 , 09:34 PM

Registered User
Join Date: Jun 2004

Location: Cleveland, Ohio (USA)

Posts: 1,541

i'd say go back and add a slight bend in the knee.

Accept no substitutions.

Quote

# 5 12-01-2007 , 08:52 AM

Registered User
Join Date: Nov 2006

Posts: 9

yes, when using IK having a slight bend in the joints will help the the IK solver determine what way its supposed to bend. Also, i noticed that you said you setup an IK from the Heel to the Hip Bone. its best to work down the Hierarchy. with the IK tool selected, click on the hip and then the heel. this will set the effectors to be down at the heel. Also, to help control which way the bend in the IK is facing, i like to use rotateplane IK solvers instead a single chain IK solver. in the AM there a channel for twist to control which way the bend is facing. i like to use a locator, snap it to the knee, then move it forward in Z so that its right in front of the knee a bit. rename the locator left(or)right Pole vector, select the left(or)right polevector and the corresponding Leg IK, and go to >Constrain>Pole Vector. now you can translate the polevector(locator) to move what way the bend in the IK is facing. hope this helps

Quote

# 6 01-02-2007 , 03:50 PM

Registered User
Join Date: Dec 2005

Posts: 22

gime a screen shot with the rig and the hierarchy and a shot of the problem.

(use https://imageshack.us/ to host your images so you dont have to crunch them down so they are illegable.)

it sounds like a combination of things to me. what you have might be the orentation and the prefered angle. where setting the prefered angle might fix it for now your orentations will probibly bite you later when you animate.

(see attatched to check the orentations) X should be pointing to the next joint in the chain either Z or Y should be pointing directly to the side of your joint if this is messed up let me know I'll let you know how to fix it.

Attached Images

Quote

IK Joint problems...

Posting Rules Forum Rules

Similar Threads

Topics

Free Courses

Full Courses

VFX News