This course will look in the fundamentals of modeling in Maya with an emphasis on creating good topology. It's aimed at people that have some modeling experience in Maya but are having trouble with
complex objects.
1st pick the edge you to start round action on it as the 1st pic
2nd press CTRL+B to bevel the edge
3rd adjust the value form the box to get the desired shape "note if the box not appear just press T or adjust the value form attribute editor or channel box"
I would also bevel the edge to get the initial shape.
Img1: Create your base shape - remove all the extra edges to start with until the base shape is right.
Img2: Bevel the edge with the size and amount of segments you want.
Img3: Select either corner, press D to get into pivot edit, then align pivot with top most vertex and the right most vertex.
Img4: Scale the selection, (do it on front and back) to get the difference you want.
Afterwards you need the create the rest of the edges to support the shape and remove the Ngon from the front and back.
There are many ways to do it, but this would be my approach to it
You may not post new threads |
You may not post replies |
You may not post attachments |
You may not edit your posts |
BB code is On |
Smilies are On |
[IMG] code is On |
HTML code is Off