Loft Problem

# 1 03-12-2003 , 02:15 AM

Registered User
Join Date: Dec 2003

Posts: 9

Hi masters,

I'm smoking my brains out because i can't loft these two curves that i imported from Illustrator.. Is that possible at all? but if i type the text inside maya nurbs and loft it's not problem at all. Just questioning why i can loft the curves from illustrator.

Thank you

Attached Images

Quote

# 2 03-12-2003 , 02:16 AM

Registered User
Join Date: Dec 2003

Posts: 9

cv pix

Quote

# 3 03-12-2003 , 02:18 AM

Registered User
Join Date: Dec 2003

Posts: 9

cv pix

Attached Images

Quote

# 4 03-12-2003 , 02:19 AM

Registered User
Join Date: Dec 2003

Posts: 9

lofted

Attached Images

Quote

# 5 03-12-2003 , 06:02 AM

Subscriber
Join Date: Jun 2003

Location: Sweden

Posts: 571

For a loft to work properly there are a few things you need to make sure. First the seams must line up (pic attached). Secondly the number of CVs on both curves should be fairly similar or you will get a screwed result. You can rebuild the curves with a fixed number of cv's to remedy the second problem (if necessary). First try to align the seams.

Attached Images

Björn 'santa' Fredriksson

<A href=https://www.bjornfredriksson.com>Site Online.</A>

Check out our 1on1on1 battle for the SandCrawlers.

Quote

# 6 03-12-2003 , 06:10 PM

Registered User
Join Date: Dec 2003

Posts: 9

Move Seam error

Hi Fredriksson

i get the following error...=(

Attached Thumbnails

Click image for larger version

Name: moveseam.gif
Views: 443
Size: 6.9 KB
ID: 11908

Quote

# 7 03-12-2003 , 08:25 PM

Moderator
Join Date: Nov 2002

Location: New York

Posts: 2,133

Have you tried simply using maya's text tool then bevel plus to make the surface?

"Terminat Bora Diem, Terminal Auctor opus."

Quote

# 8 04-12-2003 , 12:55 AM

Registered User
Join Date: Apr 2002

Posts: 441

Try Planar instead of a loft.....it worked for me when my lofts turn out all funny sometimes....although I would use the option box to tweak the looks

Quote

# 9 04-12-2003 , 01:37 AM

Subscriber
Join Date: Jun 2003

Location: Sweden

Posts: 571

Oh right, sorry, I assumed the curves were closed but the error message states otherwise. You can use Edit Curves -> open / close with blend or insert knot. You can use the text & bevel plus tool if it is just text, but if you have other stuff too you'd be better off learning how to deal with them.

Björn 'santa' Fredriksson

<A href=https://www.bjornfredriksson.com>Site Online.</A>

Check out our 1on1on1 battle for the SandCrawlers.

Quote

# 10 04-12-2003 , 02:05 AM

Registered User
Join Date: Dec 2003

Posts: 9

Hi all,

Saiyan: i did try planar but i can't get the bevel that i wanted originally from the curves placement

NitroLiq: i try the maya text tool, but don't have the same font as the character of the curves even though the tools works great =(

fredriksson : i'll give it a try...

Thank you all

Quote

# 11 04-12-2003 , 02:11 AM

Registered User
Join Date: Dec 2003

Posts: 9

fredriksson,

i used the open/close curve method...and the C disappears after closing?? using blend.... what would cause to happen? thank you..

Quote

# 12 05-12-2003 , 01:56 AM

Registered User
Join Date: Apr 2002

Posts: 441

can you possibly give us the base file you are working with?

Might be easier to have something to work with user added image

Quote

# 13 05-12-2003 , 02:01 AM

Registered User
Join Date: Dec 2003

Posts: 9

Hello again, here is the file

Attached Files

c.mb (43.6 KB, 397 views)

Quote

# 14 05-12-2003 , 02:39 AM

The Maya Mountain
Join Date: Aug 2002

Location: Seattle, WA

Posts: 8,245

Ok, you're going to need to jump through a few hoops to get this to work.

You'll first need to cut the 2 curves up at the 4 hard corners of each curve.

user added image

(Note: this was for display, don't move the curves apart like this.)

As previously mentioned, one of your curve's seem is in the middle of the large arch of the "C." When you cut your curves like this, the seem will cause the outer curve to be divided in half. Attach it together to form the one curve using the "connect" option rather than blend so as not to change the shape.

Next, rebuild each individual curves so that they match. For example, the large round outer curve when I did it was 10 spans. Rebuild its counterpart curve to be 10 spans and with the following settings:

user added image

(Note that the number "10" in this case is an example. Your numbers may vary.)

You can determine how many spans your curves have by looking in the Attribute Editor while one is selected. When comparing, you always want to rebuild BOTH curves to match the higher number of the 2. (Even rebuild the one who's numbers you're matching to get rid of inefficiency caused by the curve detachment.)

The small curves making up the ends of the C were both 1 span, but still rebuild them to be 1 span with the above options so as to clean the mathmatics behind the curves to result in clean geometry.

Etc.

Once your curves all match each other and are rebuilt, you can loft between the different sections. Once you have all your lofts, you can attach them together using the "connect" option rather than Blend to keep the sharp corners.

user added image

Enjoy.

-Mike
The Maya Toolbelt

Quote

# 15 05-12-2003 , 06:00 PM

Registered User
Join Date: Dec 2003

Posts: 9

Hey...guess what? =) It works...Before i didn't know how to detach points..but finally figured out..=) thanks for all your help everybody...awesome place to learn.:bgreen:

Quote

Loft Problem

cv pix

cv pix

lofted

Move Seam error

Posting Rules Forum Rules

Similar Threads

Topics

Free Courses

Full Courses

VFX News